Xserve homepage [ logo ]
 

 







DX 37+U - P3 Based

DX 37+U - P3 Based

Tell me more

Specifications

CPU: Dual Intel Pentium III FC-PGA/FC-PGA2 600Mhz or above (100MHz / 133MHz)
Chipset: VIA Pro266T: VIA VT8633 + VT 8233
Architecture: 1 * AGP Pro slot + 5 * PCI slots ( Bus Master )
DIMM Type : 64/128/256/512MB/1GB ECC DDR200/266 (PC1600/PC2100) with Maximum 4GB support.
On Board SCSI Controller: Adaptec 7899 Dual Channel Ultra 160 SCSI controller with maximum bus transfer rate 160MB/Sec. 15 SCSI devices.
On Board Ethernet Controller: Intel 82550 32-bits, 10/100Mbps Auto-Sense/Switch Ethernet controller.
On Board AC97 Codec AD1885: Provide basic audio function, MIC, LINE_IN, SPK_OUT audio jack and CD_IN, Modem_IN connectors.
High Performance AGP Pro Interface: 4X AGP Pro slot with up to 133MHz working frequency and 1064 M Bbit/Sec (133 x4x2 ) Data Transfer Capacity are available for 3D high performance graphics acceleration
High Performance PCI Bus: support 5 bus-master PCI solts. It compliants with PCI V2.2 specification with maximum 132MB/Sec bandwidth.
On Board I/O: 2 Serial Ports (UART 16C550 Support)
1 Parallel Port (SPP/EPP/ECP Support)
2 Channel E-IDE (PIO Mode4 & Bus Master Ultra DMA 33/66/100 support)
1 Floppy Drive Connector (1.2/1.44/2.88MB)
4 Universal Serial Bus Ports
2 Channel Ultra 160 SCSI 68pin Connector
10/100Mb Ethernet Connector RJ45
WOL ( Wake On LAN )
WOM ( Wake On Modem )
1 PS/2 Mouse Port
1 PS/2 Keyboard Port
Audio Port ( MIC, LINE_IN, SPK_OUT )
CPU fan connector ( 3pins ) * 2
System Fan connector ( 3 pins ) * 2
RTC: Built in ASIC
Battery: 3V Lithium Battery
Green Function: Yes
BIOS: 4Mb Flash ROM BIOS
Board Size: 305 mm x 244mm, ATX form factor
Top
Contact us | Sitemap | Email : Info@xserves.com