WLAN 802.11b CF Embedded Module for PDA (Model No : KCC-3)

Features:

Frequency range	2.4G ~ 2.4835Ghz
Modulation technique	DSSS (Direct Sequence Spread Spectrum) with BPSK (1Mbps), QPSK (2Mbps), and CCK (5.5 and 11Mbps)
Host interface	Compact Flash Version 1.4
Dimension(Preliminary)	- embedded module: 47mm(L) x 19mm(W) x 4.2 mm(H)
Weight	- module: under 20g
Form factor	- Proprietary CF HRS 50 pin connector
Channels support	11channel
Operation voltage	3.3V +/- 5%
Power consumption	- Transmission mode: 310mA (Typical) - Receives mode: 290mA(Typical) - Standby mode: 270mA(Typical) - Power saving mode: 34mA (Typical)
Multipath delay	125ns at 11Mbps, 250ns at 5.5Mbps
Output power	13-17dBm
Operation range	- Indoor: 35 ~100 meter @ 11Mbps (Estimated) - Outdoor: 300 meter @ 11Mbps (Estimated)
Sensitivity	@PER <0.08 Max: -82dBm @ 11Mpbs Typical: -84dBm @ 11Mpbs
Operation system	PPC2003
Security	64-bit , 128-bit WEP encryption, WPA support (subjected to get Microsoft's help)
Transfer data rate	11Mbps, 5.5Mbps, 2Mbps, 1Mbps , auto-rate
Operation temperature range	0°C~ 70°C
Storage temperature range	-20°C ~ 75°C
Humidity (non-condensing)	10% ~90%
EMC certificate	- FCC (USA) - IC RSS210 (Canada) - EN 300-328, EN301-1/17, EN60950 (Europe) - ARIB STD-T66, RCR STD-33 (Japan) - The above regulators subject to customer's request
Media access protocol	CSMA/CA with ACK
LED	Pin 45 for the LED signal
Antenna	Meander IFA antenna directly mounting in WLAN module